EVAPORATOR PARTS & SUPPLIES

Scoops & Skimmers
Compact, square, stainless steel, perforated - for removing foam and other foreign matter from syrup pans, solder free.
SQUSKI

Compact square type, stainless steel, non-perforated scoop for dipping syrup out of pan.
SCOOP1

 

Arch/Pan Gasket - A soft and thick gasket capable of enduring high temperatures reduces cold draft leakage under the pans.
 
     1" thick x 2" wide x 12.5' long
PANG50
     1" thick x 2" wide x 25' long
PANG12
 
Hi-Temp "Form a Gasket" - A silicone caulking material in a 300ml tube. Withstands extreme temperatures up to 600º F. Great for use around smokestack flashings, or for adhering gasket material on air tight fire doors, etc.
 
GASCAR
 
Ceramic Wool Blanket - To line oil or gas fired arches. Available in 3 densities to suit your requirements. Can easily be cut with a knife. Only comes 24" wide.
    4 lb. Density, 1" thick
CER004_1
 
  Less than case qty. /sq. ft.
  Case of 50 sq. ft. (2' wide x 25' long) /sq. ft.
    6 lb. Density, 1" thick
CER006_1
 
  Less than case qty.
/ sq. ft.
  Case of 50 sq. ft. (2' wide x 25' long) / sq. ft.
    8 lb. Density, 1" thick
CER008_1
 
  Less than case qty.
/ sq. ft.
  Case of 50 sq. ft. (2' wide x 25' long) / sq. ft.
Firebricks - 2" for lining evaporator arches; 1" for wood stoves.
    4 1/2" x 9" x 2"
FIRBRI

 

    4 1/2" x 9" x 1"
FIRBR1
    7" Diamond blade for circular saw to cut firebricks.
DIABLA
 
Firecement -
    8 kg or 1 gallon premixed can (enough for 40 bricks)
FICE08

 

    25 kg or 3 gallon premixed can (enough for 110 bricks) FICE25
    Vermiculite - To fill arch, an excellent insulator. 4 cu. ft. bag
VERMIC

 

PAN REPAIR SUPPLIES
Flux, special, essential for soldering pans, 16 oz. -- Please note, this item must be picked up in person or can only be shipped by Dicom (Ontario and Quebec only).  A Dangerous Goods surcharge of $26.00 is applied plus shipping cost.
 
FLUXSS
Solder Iron, use with a propane heater.
SOLIRO

 

 
Roll of Lead-Free Solder, 400 gr.
ROLSOL

 

RUBBER INTERCONNECTION HOSE FOR PANS
1" I.D.
HOS100
1 1/8" I.D.
HOS118
1 1/4" I.D.
HOS125
/ft.
1 3/8" I.D.
HOS138
 
/ft.
1 1/2" I.D.
HOS150
/ft.
1 3/4" I.D.
HOS175
/ft.
1 7/8" I.D.
HOS178
/ft.
2" I.D.
HOS200
/ft.
2 1/8" I.D.
HOS218
/ft.
2 1/4" I.D.
HOS214
/ft.
2 1/2" I.D.
HOS250
/ft.

 

FLOATS
When ordering a replacement float for any evaporator, please include as much information as possible. Include make of evaporator, float length, width, height, and if post is adjustable, has one series of holes or 2 series of holes, their distance apart, and if the float is brass or stainless steel. Older floats may have to be made special, and could require up to eight weeks for delivery.
Dominion & Grimm, S/S welded (state dimensions)
Small Bros. Sap Float, stainless steel, tig welded. (12" L x 6" W x 1 1/2" H)
SMBCSF
Small Bros. Syrup Float, stainless steel, tig welded. (8 1/2" L x 5" W x 1 1/2" H)
SMBHSF

 

FLOAT GASKETS
For any make and model evaporator
 
DOMINION & GRIMM SMALL BROS. WATERLOO
Old Style, Black Rubber 1 1/4" I.D. x 1/2" D Groove Foam, Rubber, white 1 3/4" diameter x 5/16" thick Cold Float Gasket, Beige, 3 3/8" diameter x 5/16" thick
DGGSPE
SMBGA1
WAGACO
 
New Style, Small O-Ring
1 1/4" O.D.
Foam Rubber, White 2 1/4" diameter x 5/16" thick Hot Float Gasket, White, 3 3/8" diameter x 1/8" thick
WAGAHO
 
New Style, Large O-Ring 2 1/8" O.D. Black, hypalon 1 3/4" diameter x 1/8" thick  
DGG218
SMBGA3
   
 
  Black, hypalon 2 1/4" diameter x 1/8" thick  
   
SMBGA4
   

 

FLOAT CONTROL
For the do-it-yourselfer. Make your own sap level control to feed your pans or tanks. Available in 2 sizes to suit most applications. Brass construction. A very economical alternative to the models offered by evaporator manufacturers. 1/2" pipe thread, comes with valve, float arm, float.
FLO050
Same as above, but 3/4"
FLO075

 

Sight Glass Tube -
    Glass, 5/8" diameter x 12" long
SIGGLA


 

All prices are in Canadian funds. Prices subject to change without notice.

© 2004 - 2009 Atkinson Maple Syrup Supplies O/B Davtech Industries Ltd.
Designated trademarks and brands are the property of their respective owners.


Contact the Webmaster
Last Updated:  Nov. 27, 2009

 

Developed and hosted by Barrie Web