VACUUM & PUMP SYSTEMS

 

(MADE SPECIFICALLY TO ORDER SINCE ALL BUSHES HAVE DIFFERENT REQUIREMENTS)
RULE OF THUMB: Choose a vacuum pump with a minimum capacity of 1 CFM per 100 spiles. Choose 1 CFM per 50 spiles if possible

 

AIRABLO COMPACT VACUUM SYSTEMS
  • great for up to 800 taps.
  • self contained, only requires a sap extractor tank to operate.
  • the vacuum pum is lubricated and cooled with the flood oil system.
  • oil is reclaimed and not sprayed out in the exhaust with the oil reclaimer/ cooler unit.
  • oil is included with each compact model.
  • comes with moisture/ overflow protector trap.
  • plumbed as a working unit, sitting on a sturdy base.

 

800 taps, 3/4 HP 115 volt electric model (picture shown) COMVE8
800 taps, 5.5 HP Honda gas motor, electric start model COMVG8

 

1500 taps, 1.5 HP 115 volt electric model

 

COMVE1

 

1500 taps, 5.5 HP Honda gas motor, electric start model COMVG1

 

3000 taps, 3 HP 230 volt electric model

 

COMVE3

 

Many larger electric and gasoline powered models available.

 

 

MANUAL SAP EXTRACTOR TANK (tank only - no pump)
This tank can be used in remote locations, and locate your vacuum pump close to your buildings and electricity. Storage tank and 1 1/4" - 1 1/2" line required. This model is ideal for up to 3000 taps and works extremely well. Multiple tanks in different locations can be used with one vacuum pump. Very dependable.
Don't be fooled by imitations! Ask for genuine BERNARD!
Similar to model on left, single cylinder, rated for up to 800 taps.

MANEX2  
Only 
MANEX1
Replacement flapper for Bernard tanks  
FLAPPE 

 

 

 

Manual Sap Extractor Tank - Horizontal

Works on the same basis as the tank shown above but suitable for 6000 

or more taps.

                                                                                                                                                                                       

 BER215

 

 

 

Vertical Sap Extractor Tank

This tank must be used with a liquid pump (not included) to draw the sap out and pump it to your

 storage tank. Comes with float switch to start and stop pump and 1.5" fnpt hole for pump. Sap 

mainlines attach to header manifold.                                                                                              

BER224

 


 

NEW!
SAP LADDER AIR INJECTOR
Another genuine BERNARD innovation! This ingenious device when used with a check valve, periodically allows a burst of air into the line just ahead of a sap latter (not included) allowing the sap to travel up the ladder quickly and easily. Fully adjustable for air volume and opening/closing frequency. Complete with check valve.
AIRINJ  

 


Parts & Accessories
Vacuum Tank overflow protector is a ball type check valve to prevent sap from getting to dry pump if tank overfills. Comes with a 90º elbow ready to insert into a 1 1/2" poly pipe. Can be adapted up or down in size.
OVEPRO
Vacuum pump oil, lightweight, for oil lubricated vacuum pumps. 3.7L jug.
PUM004
Vacuum oil filter for Airablo flood oil
VACFIL
"Flood" oil for Airablo vacuum pumps. 18.9L

PUMF20

Vacuum Gauge. Small 2 1/2" dial.
VACGAS
Vacuum Gauge. Large 4" dial.
VACGAL
Vacuum Regulator, Heavy Duty.
VACREG
Replacement black rubber flapper for Airablo moisture traps, 1 1/2"
CLAPET

 

All prices are in Canadian funds. Prices subject to change without notice.

© 2004 - 2009 Atkinson Maple Syrup Supplies O/B Davtech Industries Ltd.
Designated trademarks and brands are the property of their respective owners.


Contact the Webmaster
Last Updated: Nov. 30, 2011
Developed and hosted by Barrie Web